F-Tile Serial Lite IV Intel® FPGA IP User Guide

ID 683074
Date 11/16/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

7.1. Reset Guidelines

Follow these reset guidelines to implement your system-level reset.
  • Tie tx_pcs_fec_phy_reset_n and rx_pcs_fec_phy_reset_n signals together on the system level in order to reset the TX and RX PCS simultaneously.
  • Assert tx_pcs_fec_phy_reset_n, rx_pcs_fec_phy_reset_n, tx_core_rst_n, rx_core_rst_n, and reconfig_reset signals at the same time. Refer to Reset and Link Initialization for more information about the IP reset and initialization sequences.
  • Hold tx_pcs_fec_phy_reset_n, and rx_pcs_fec_phy_reset_n signals low, and reconfig_reset signal high and wait for tx_reset_ack and rx_reset_ack to properly reset the F-tile hard IP and the reconfiguration blocks.
  • To achieve fast link-up between FPGA devices, reset the connected F-Tile Serial Lite IV Intel® FPGA IPs at the same time. Refer to F-Tile Serial Lite IV Intel® FPGA IP Design Example User Guide for information about monitoring the IP TX and RX link using the toolkit.