Visible to Intel only — GUID: mwh1410383752323
Ixiasoft
2.3.1. Recommended Initial SDC Constraints
2.3.2. SDC File Precedence
2.3.3. Iterative Constraint Modification
2.3.4. Creating Clocks and Clock Constraints
2.3.5. Creating I/O Constraints
2.3.6. Creating Delay and Skew Constraints
2.3.7. Creating Timing Exceptions
2.3.8. Example Circuit and SDC File
2.3.7.5.1. Default Multicycle Analysis
2.3.7.5.2. End Multicycle Setup = 2 and End Multicycle Hold = 0
2.3.7.5.3. End Multicycle Setup = 2 and End Multicycle Hold = 1
2.3.7.5.4. Same Frequency Clocks with Destination Clock Offset
2.3.7.5.5. Destination Clock Frequency is a Multiple of the Source Clock Frequency
2.3.7.5.6. Destination Clock Frequency is a Multiple of the Source Clock Frequency with an Offset
2.3.7.5.7. Source Clock Frequency is a Multiple of the Destination Clock Frequency
2.3.7.5.8. Source Clock Frequency is a Multiple of the Destination Clock Frequency with an Offset
Visible to Intel only — GUID: mwh1410383752323
Ixiasoft
2.3.6.1. Advanced I/O Timing and Board Trace Model Delay
The Timing Analyzer can use advanced I/O timing and board trace model constraints to model I/O buffer delays in your design.
If you change any advanced I/O timing settings or board trace model assignments, recompile your design before you analyze timing, or use the -force_dat option to force delay annotation when you create a timing netlist.
Forcing Delay Annotation
create_timing_netlist -force_dat