Intel® MAX® 10 Clocking and PLL User Guide

Download PDF
ID 683047
Date 12/26/2023
Public
Document Table of Contents
Document Table of Contents x
1. Intel® MAX® 10 Clocking and PLL Overview 2. Intel® MAX® 10 Clocking and PLL Architecture and Features 3. Intel® MAX® 10 Clocking and PLL Design Considerations 4. Intel® MAX® 10 Clocking and PLL Implementation Guides 5. ALTCLKCTRL Intel® FPGA IP References 6. Avalon ALTPLL Intel® FPGA IP References 7. Avalon ALTPLL RECONFIG Intel® FPGA IP References 8. Internal Oscillator Intel® FPGA IP References 9. Intel® MAX® 10 Clocking and PLL User Guide Archives 10. Document Revision History for the Intel® MAX® 10 Clocking and PLL User Guide
1. Intel® MAX® 10 Clocking and PLL Overview x
1.1. Clock Networks Overview 1.2. Internal Oscillator Overview 1.3. PLLs Overview
2. Intel® MAX® 10 Clocking and PLL Architecture and Features x
2.1. Clock Networks Architecture and Features 2.2. Internal Oscillator Architecture and Features 2.3. PLLs Architecture and Features
2.1. Clock Networks Architecture and Features x
2.1.1. Global Clock Networks 2.1.2. Clock Pins Introduction 2.1.3. Clock Resources 2.1.4. Global Clock Network Sources 2.1.5. Global Clock Control Block 2.1.6. Global Clock Network Power Down 2.1.7. Clock Enable Signals
2.3. PLLs Architecture and Features x
2.3.1. PLL Architecture 2.3.2. PLL Features 2.3.3. PLL Locations 2.3.4. Clock Pin to PLL Connections 2.3.5. PLL Counter to GCLK Connections 2.3.6. PLL Control Signals 2.3.7. Clock Feedback Modes 2.3.8. PLL External Clock Output 2.3.9. ADC Clock Input from PLL 2.3.10. Spread-Spectrum Clocking 2.3.11. PLL Programmable Parameters 2.3.12. Clock Switchover 2.3.13. PLL Cascading 2.3.14. PLL Reconfiguration
2.3.7. Clock Feedback Modes x
2.3.7.1. Source Synchronous Mode 2.3.7.2. No Compensation Mode 2.3.7.3. Normal Mode 2.3.7.4. Zero-Delay Buffer Mode
2.3.11. PLL Programmable Parameters x
2.3.11.1. Programmable Duty Cycle 2.3.11.2. Programmable Bandwidth 2.3.11.3. Programmable Phase Shift
2.3.12. Clock Switchover x
2.3.12.1. Automatic Clock Switchover 2.3.12.2. Automatic Switchover with Manual Override 2.3.12.3. Manual Clock Switchover
2.3.13. PLL Cascading x
2.3.13.1. PLL-to-PLL Cascading 2.3.13.2. Counter-to-Counter Cascading
3. Intel® MAX® 10 Clocking and PLL Design Considerations x
3.1. Clock Networks Design Considerations 3.2. Internal Oscillator Design Considerations 3.3. PLLs Design Considerations
3.1. Clock Networks Design Considerations x
3.1.1. Guideline: Clock Enable Signals 3.1.2. Guideline: Connectivity Restrictions
3.2. Internal Oscillator Design Considerations x
3.2.1. Guideline: Connectivity Restrictions
3.3. PLLs Design Considerations x
3.3.1. Guideline: PLL Control Signals 3.3.2. Guideline: Connectivity Restrictions 3.3.3. Guideline: Self-Reset 3.3.4. Guideline: Output Clocks 3.3.5. Guideline: PLL Cascading 3.3.6. Guideline: Clock Switchover 3.3.7. Guideline: .mif Streaming in PLL Reconfiguration 3.3.8. Guideline: scandone Signal for PLL Reconfiguration
4. Intel® MAX® 10 Clocking and PLL Implementation Guides x
4.1. ALTCLKCTRL Intel® FPGA IP 4.2. Avalon ALTPLL Intel® FPGA IP 4.3. Avalon ALTPLL RECONFIG Intel® FPGA IP 4.4. Internal Oscillator Intel® FPGA IP
4.2. Avalon ALTPLL Intel® FPGA IP x
4.2.1. Expanding the PLL Lock Range 4.2.2. Programmable Bandwidth with Advanced Parameters 4.2.3. PLL Dynamic Reconfiguration Implementation 4.2.4. Dynamic Phase Configuration Implementation
4.2.3. PLL Dynamic Reconfiguration Implementation x
4.2.3.1. Post-Scale Counters (C0 to C4) 4.2.3.2. Scan Chain 4.2.3.3. Charge Pump and Loop Filter 4.2.3.4. Bypassing PLL Counter
4.2.4. Dynamic Phase Configuration Implementation x
4.2.4.1. Dynamic Phase Configuration Counter Selection 4.2.4.2. Dynamic Phase Configuration with Advanced Parameters
4.3. Avalon ALTPLL RECONFIG Intel® FPGA IP x
4.3.1. Obtaining the Resource Utilization Report
5. ALTCLKCTRL Intel® FPGA IP References x
5.1. ALTCLKCTRL Intel® FPGA IP Parameters 5.2. ALTCLKCTRL Intel® FPGA IP Ports and Signals
6. Avalon ALTPLL Intel® FPGA IP References x
6.1. Avalon ALTPLL Intel® FPGA IP Parameters 6.2. Avalon ALTPLL Intel® FPGA IP Ports and Signals
6.1. Avalon ALTPLL Intel® FPGA IP Parameters x
6.1.1. Operation Modes Parameter Settings 6.1.2. PLL Control Signals Parameter Settings 6.1.3. Programmable Bandwidth Parameter Settings 6.1.4. Clock Switchover Parameter Settings 6.1.5. PLL Dynamic Reconfiguration Parameter Settings 6.1.6. Dynamic Phase Configuration Parameter Settings 6.1.7. Output Clocks Parameter Settings
7. Avalon ALTPLL RECONFIG Intel® FPGA IP References x
7.1. Avalon ALTPLL RECONFIG Intel® FPGA IP Parameters 7.2. Avalon ALTPLL RECONFIG Intel® FPGA IP Ports and Signals 7.3. Avalon ALTPLL RECONFIG Intel® FPGA IP Counter Settings
8. Internal Oscillator Intel® FPGA IP References x
8.1. Internal Oscillator Intel® FPGA IP Parameters 8.2. Internal Oscillator Intel® FPGA IP Ports and Signals
1. Intel® MAX® 10 Clocking and PLL Overview
2. Intel® MAX® 10 Clocking and PLL Architecture and Features
3. Intel® MAX® 10 Clocking and PLL Design Considerations
4. Intel® MAX® 10 Clocking and PLL Implementation Guides
5. ALTCLKCTRL Intel® FPGA IP References
6. Avalon ALTPLL Intel® FPGA IP References
7. Avalon ALTPLL RECONFIG Intel® FPGA IP References
8. Internal Oscillator Intel® FPGA IP References
9. Intel® MAX® 10 Clocking and PLL User Guide Archives
10. Document Revision History for the Intel® MAX® 10 Clocking and PLL User Guide

2.3.12.2. Automatic Switchover with Manual Override

In automatic switchover with manual override mode, you can use the clkswitch signal for user- or system-controlled switch conditions. You can use this mode for same-frequency switchover, or to switch between inputs of different frequencies.

For example, if inclk0 is 66 MHz and inclk1 is 200 MHz, you must control the switchover using the clkswitch signal. The automatic clock sense circuitry cannot monitor clock input (inclk0 and inclk1) frequencies with a frequency difference of more than 20%.

This feature is useful when clock sources originate from multiple cards on the backplane, requiring a system-controlled switchover between frequencies of operation.

You must choose the backup clock frequency and set the M, N, and C counters so that the VCO operates within the recommended frequency range.

The following figure shows a clock switchover waveform controlled by the clkswitch signal. In this case, both clock sources are functional and inclk0 is selected as the reference clock. The clkswitch signal goes high, which starts the switchover sequence. On the falling edge of inclk0, the counter’s reference clock, muxout, is gated off to prevent clock glitching. On the falling edge of inclk1, the reference clock multiplexer switches from inclk0 to inclk1 as the PLL reference. The activeclock signal is asserted to indicate the clock that is currently feeding the PLL, which is inclk1.

In automatic override with manual switchover mode, the activeclock signal mirrors the clkswitch signal. Since both clocks are still functional during the manual switch, neither clkbad signal goes high. Because the switchover circuit is positive-edge sensitive, the falling edge of the clkswitch signal does not cause the circuit to switch back from inclk1 to inclk0. When the clkswitch signal goes high again, the process repeats.

Figure 22. Example of Clock Switchover Using the clkswitch (Manual) Control

The clkswitch signal and automatic switch work only if the clock being switched to is available. If the clock is not available, the state machine waits until the clock is available.

Level Two Title