Intel® Stratix® 10 Hard Processor System Remote System Update User Guide

ID 683021
Date 4/05/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

4.2.3.4. Creating Decision Firmware Update Images

The following command is used to create decision firmware update images:

quartus_pfg -c \
factory_design.sof \
decision_update.rpd \
-o hps_path=fsbl.hex \
-o mode=ASX4 \
-o bitswap=ON \
-o rsu_upgrade=ON \
-o firmware_only=ON \
-o hps=1

The following table describes the parameters.

Parameter Description
factory_design.sof Input SOF file, containing the FPGA design with the parameters for the decision firmware data
decision_update.rpd Output decision firmware update image
-o hps_path=fsbl.hex Input HPS FSBL hex binary file, ignored
-o mode=ASX4 Create image targeting QSPI
-o bitswap=ON Create file in regular binary format
-o rsu_upgrade=ON Select factory upgrade image
-o firmware_only=ON Select to upgrade just decision firmware
-o hps=1 Use only for HPS first designs

For FPGA first case, the parameter “-o hps=1” must be omitted, and the file decision_update.rpd is created.

For HPS first the parameter “-o hps=1” must be passed, and the following two files will be created:

  • decision_update.hps.rpd—contain the decision firmware update image
  • decision_update.core.rbf—corresponding fabric configuration file, to be discarded