Article ID: 000086974 Content Type: Error Messages Last Reviewed: 08/04/2023

Error (178018): Channels in the bonded channel groups containing the following must be placed in contiguous locations. If CMU PLLs are used, gaps must be left for the transmit PLL channel.

Environment

  • Quartus® II Subscription Edition
  • Arria® V Transceiver Native PHY Intel® FPGA IP
    • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    You may encounter the following Fitter errors if you are compiling a design with the 4 channels of a XAUI PHY placed across two Arria® V device transceiver banks in Quartus® II 13.0.

    Error (178018): Channels in the bonded channel groups containing the following must be placed in contiguous locations. If CMU PLLs are used, gaps must be left for the transmit PLL channel.

    Resolution

    This problem is fixed starting with the Intel® Quartus® Prime Standard Edition Software version 13.1.

    Related Products

    This article applies to 1 products

    Arria® V GX FPGA

    Need more help?

    Contact support

    Disclaimer

    1

    All postings and use of the content on this site are subject to Intel.com Terms of Use.