Description
The MAX II VCCIO standby current varies between different I/O banks for some devices. It is also dependant on the device VCCIO voltage. The table below shows the VCCIO standby current across the MAX II family, for typical condition. Higher VCCIO standby current in certain I/O banks is caused by additional circuitry in the banks which does not affect the functionality of the devices.
| VCCIO Standby Current (mA) | ||||||||||||||||
| VCCIO | 1.5 V | 1.8 V | 2.5 V | 3.3 V | ||||||||||||
| Device | Bank 1 | Bank 2 | Bank 3 | Bank 4 | Bank 1 | Bank 2 | Bank 3 | Bank 4 | Bank 1 | Bank 2 | Bank 3 | Bank 4 | Bank 1 | Bank 2 | Bank 3 | Bank 4 |
| EPM240 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.09 | 0.01 | 1.99 | ||||||||
| EPM570 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.09 | 0.01 | 1.99 | ||||||||
| EPM1270 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.09 | 0.01 | 0.01 | 0.01 | 1.99 |
| EPM2210 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.09 | 0.01 | 0.01 | 0.01 | 1.99 |
| EPM240G | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.09 | 0.01 | 1.99 | ||||||||
| EPM570G | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.09 | 0.01 | 1.99 | ||||||||
| EPM1270G | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.09 | 0.01 | 0.01 | 0.01 | 1.99 |
| EPM2210G | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.09 | 0.01 | 0.01 | 0.01 | 1.99 |