Article ID: 000077395 Content Type: Troubleshooting Last Reviewed: 07/24/2019

Why does Intel® Arria® 10 ATX PLL and PMA calibration fail when 'pin_perstn' of PCIe HIP keeps asserted on power up?

Environment

  • Intel® Quartus® Prime Pro Edition
  • Intel® Quartus® Prime Standard Edition
    • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    Due to a calibration code problem in Intel® Quartus Prime 16.1 and earlier version, Arria® 10 ATX PLL and PMA calibration failure might be found when 'pin_perstn' of PCIe HIP keeps asserted on device power up. The "cal_busy" signal will not be released with "pin_perstn"  asserted.

    Resolution

    To avoid this failure, please use Intel Quartus Prime 17.1 or later version. 

    Related Products

    This article applies to 3 products

    Intel® Arria® 10 GT FPGA
    Intel® Arria® 10 GX FPGA
    Intel® Arria® 10 SX SoC FPGA

    Need more help?

    Contact support

    Disclaimer

    1

    All postings and use of the content on this site are subject to Intel.com Terms of Use.