Article ID: 000076607 Content Type: Troubleshooting Last Reviewed: 02/12/2023

Why does reconfiguration through a non-JTAG source fail after first programming via JTAG in Intel® Stratix® 10 devices?

Environment

  • Intel® Quartus® Prime Pro Edition
  • Config Debug Agent Intel® FPGA IP
  • Configuration and Programming
    • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    Due to a problem starting with the Intel® Quartus® Prime Pro Edition Software version 18.0,  if your Intel® Stratix® 10 device is first configured via JTAG, you cannot subsequently reconfigure via a non-JTAG source. 

    Resolution

    To work around this problem, power cycle your Intel® Stratix® 10 device if the failure occurs.

    Related Products

    This article applies to 1 products

    Intel® Stratix® 10 FPGAs and SoC FPGAs

    Need more help?

    Contact support

    Disclaimer

    1

    All postings and use of the content on this site are subject to Intel.com Terms of Use.