Article ID: 000073927 Content Type: Troubleshooting Last Reviewed: 12/16/2019

Why does fpgaconf command fail with error message “No accelerator found to reconfigure”?

Environment

  • Intel® Quartus® Prime Pro Edition
    • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    Due to a problem of current version of the Intel® Acceleration Stack, when AFU reads/writes host memory at an invalid address, it would cause the FIM to become locked up. For successive PR using fpgaconf command, you will always see the error “No accelerator found to reconfigure”.

    Resolution

    To work around the problem currently, the PAC Card needs to be power cycled to recover from this state.

    This problem is fixed starting with the Intel® Acceleration Stack version 1.2.1.

    Related Products

    This article applies to 1 products

    Intel® Arria® 10 FPGAs and SoC FPGAs

    Need more help?

    Contact support

    Disclaimer

    1

    All postings and use of the content on this site are subject to Intel.com Terms of Use.