Known Issues with the Intel® Virtual RAID on CPU (Intel® VROC) 7.0 Release for Windows*
The following information lists the known issues with the Intel® VROC 7.0 release for Windows*. To learn about the latest updates of Intel® VROC for Windows*, refer to the Intel® Virtual RAID on CPU (Intel® VROC) Release Notes for Windows*.
| Issue ID | Description |
| 1306412122 | Setting the LED configuration of empty slot as fail may not show Fail when the slot is empty. |
| 1407347823 | Intel® Rapid Storage Technology enterprise (Intel® RSTe) RCfgRSTeRS.efi disk IDs may not be consistent with a RAID 5 volume created with journaling drive and the process may become unresponsive. |
| 1409667894 | The option to locate a LED (Locate LED) from the Intel® VROC BIOS HII menu causes the page to exit prematurely. |
| 1507710434 | When using the Intel® VROC Legacy Option ROM, the RAID volume may not be displayed properly when the RAID volume is greater than 10TB. |
| 1507753655 | When running stress testing on M.2 slots managed by the sSATA controller, an isStorB error may be logged. |
| 1805900436 | The Intel® VROC F6 drivers may not properly load, and a refresh may be required. |
| 1806564424 | The system may fail to start after an unexpected power loss. |
| 1808018122 | Trying to clear a SMART event from a drive after a RAID volume is rebuilt (to another drive) may show up as an unknown disk. |
| 1808094827 | The Intel® VROC (VMD NVMe* RAID) Pre-OS environment may only show 32 NVMe* drives in the Intel® VROC HII. |
| 1808160495 | The Intel® VROC Graphical User Interface (GUI) and Command-Line Interface (CLI) utilities that manage Intel® VROC (NonVMD NVMe* RAID) Intel NVMe* SSDs may not properly gray out those drives when they are attached to the platform's PCH controller. Intel® VROC (NonVMD NVMe* RAID) currently does not support Intel NVMe* SSDs attached to the platform PCH. |
| 1808275753 | A wrong RAID volume state may be displayed after a dirty shutdown. |
| 1808389290 | The Intel® VROC rebuild LED behavior may not operate properly when customized to blink all LEDs during a RAID rebuild. |
| 1808630874 | When running the Intel® VROC installer, the system report may show the Intel® VROC (SATA RAID) version as the same as the Intel® VROC (VMD NVMe* RAID) version when in fact, it is different. The version obtained from the Windows* Device Manager is correct. |
| 1808963497 | RAID initialization may not be automatically performed when the Verify or Verify and Repair process is initiated by the Intel® VROC Command-Line Interface (CLI) utility on an uninitialized volume. |
| 1809368620 | The error notification about a failed volume may not be shown in the Intel® VROC Graphical User Interface (GUI) utility. |
| 1809400331 | Intel® VROC rebuild on hot-insert may not work properly on a matrix RAID volume when one of the volumes is a RAID 0 volume. |
| 14011049937 | The order of the SATA drives attached to the sSATA controller may not match that of how they may be reported in the SATA controller. |
| 14011249412 | The option to activate a LED (Activate LED) may not work for non-Intel drives when using the Intel SSD Only license. |
| 14011446153 | Exporting the output from the Intel® VROC Command-Line Interface (CLI) utility to an .xml file may not work properly. This is a known limitation with this tool. |
| 18010905203 | Creating a RAID volume from the Intel® VROC Pre-OS with drives connected to JBOF may not succeed and result in the error message: Create volume failed! Cannot write to disk. |
| 18010986194 | The Intel® VROC Pre-OS may not properly show a boot RAID volume as bootable after the RAID volume encounters a fail condition. |
| 18011258092 | Clearing RAID metadata from the RCfg tool may result in a platform hang in UEFI and ASSERT. |
| 18011468952 | When using the Intel® VROC HII to create a RAID volume using drives with different attributes, the warning message may not be displayed. |
| 18011690000 | The option to activate a LED (Active LED) may not work in the Intel® VROC Graphical User Interface (GUI) and Command-Line Interface (CLI) utilities, when using the Intel SSD Only license. |
| 18011792455 | When using a hot spare back plane from a Whitley platform in Cedar Island platform, the SATA LEDs may not work properly. |
| 22010314523 | Migration of one RAID 10 volume to a RAID 5 volume may cause another RAID 10 volume, in the system, to automatically re-initialize. |
| 22010429904 | The default RAID volume size varies for RAID volumes created from the Intel® VROC Pre-OS and Graphical User Interface (GUI) utility. |
| 22010691032 | The Intel® VROC installer help dialog does not contain all available setup options. The missing options are:
|
| Looking for more information about the Intel® VROC 7.0 release? |
| Check out the following resources: |
| Related topics |
| Intel® Virtual RAID on CPU (Intel® VROC) Release Notes for Windows* |
| Release Notes for Intel® Virtual RAID on CPU (Intel® VROC) |
| Resources for Intel® Virtual RAID on CPU (Intel® VROC) |