Software Package Components of the Intel® Virtual RAID on CPU (Intel® VROC) 8.0 Release for Windows*

Documentation

Product Information & Documentation

000099900

10/23/2024

The Intel® VROC release package for Windows* is constructed of several components. The following is the list of those components and their corresponding version numbers for the Intel® VROC 8.0 release. Due to components being different entities (but required for the product to work properly), the component version number may not match and will be different from the package version number. To learn about the latest updates of Intel® VROC for Windows*, refer to the Intel® Virtual RAID on CPU (Intel® VROC) Release Notes for Windows*.

Fishhawk Falls (FHF) Platform
With the release of the Intel® VROC 8.0 package, two sets of software packages were published: one for general platforms and one for the Fishhawk Falls (FHF) platform.

General Platforms

Feature Notes
Intel® UEFI Drivers

All these images are required and intended to support Intel® Volume Management Device (Intel® VMD) and Intel® VROC (SATA RAID) functionality as a combined installed package:

  • Intel® VROC UEFI driver version 8.0.0.4006
    • VMDVROC_1.efi (hardware key enforcement in effect)
  • Intel® VMD UEFI version 3.0.0.1079
    • VMDVROC_2.efi
  • Intel® VROC (SATA RAID) SATA/sSATA UEFI driver version 8.0.0.4006
    • SataDriver.efi
    • sSataDriver.efi
Intel® VROC Windows* Drivers
  • Intel® VROC Windows* Graphical User Interface (GUI) version 8.0.0.4030
  • Intel® VROC Windows* Installer Package version 8.0-1.0.10.0
    • SetupVROC.exe (multi-lingual)
  • Intel® VROC (VMD NVMe* RAID) Windows* F6 driver version 8.0.0.4028 Win10
    • \IntelVROC_f6_iaStorE_win10_64.8.0.0.4028\iaVROC
  • Intel® VROC (SATA RAID) Windows* F6 driver version 8.0.0.4028 Win10
    • \iaStorE.free.win10.64bit.8.0.0.4028\iaStorE (SATA)
    • \iaStorE.free.win10.64bit.8.0.0.4028\iaStorB (sSATA)
  • Intel® VROC Command-Line Interface (CLI) version 8.0.0.4030
UEFI Based RAID Configuration Utility1
  • Intel® VROC version 8.0.0.4006
    • RCfgVROC.efi
  • Intel® VROC SATA/sSATA version 8.0.0.4006
    • RCfgSata.efi
    • RCfgsSata.efi
UEFI Based Comply Utility1
  • Intel® VROC version 8.0.0.4006
    • RCmpVROC.efi
  • Intel® VROC SATA/sSATA version 8.0.0.4006
    • RCmpSata.efi
    • RCmpsSata.efi
UEFI Based SATA SGPIO/LED Test Utility1
  • Intel® VROC SATA/sSATA version 8.0.0.4006
    • LedToolSata.efi
    • LedToolsSata.efi
UEFI Based Intel® VROC LED Test Utility2
  • Intel® VROC version 8.0.0.4006
    • LedToolVROC.efi
UEFI Based Clear Metadata Utility
  • Intel® VROC SATA/sSATA version 8.0.0.4006
    • RClrSata.efi
    • RClrsSata.efi
UEFI Based Intel® VROC Hardware Key Checker3
  • Intel® VROC Activation Key Checker version 8.0.0.4006
    • HWKeyCheckVROC.efi

1 Secure Boot must be disabled to use this tool.
2 This tool can be used to exercise LEDs for NVMe* drives behind Intel® Volume Management Device (Intel® VMD).
3 This tool will check for the presence and type of the hardware key.

Fishhawk Falls (FHF) Platform

The Intel® VROC 8.0.0.3483 release package is targeted for Fishhawk Falls (FHF) Sapphire Rapids (SPR) workstation-based platforms only. Running on other platforms may result in undesirable behaviors.

Feature Notes
Intel® UEFI Drivers

All these images are required and intended to support Intel® Volume Management Device (Intel® VMD) and Intel® VROC (SATA RAID) functionality as a combined installed package:

  • Intel® VROC UEFI driver version 8.0.0.1396
    • VMDVROC_1.efi (hardware key enforcement in effect)
  • Intel® VMD UEFI version 3.0.0.1006
    • VMDVROC_3.efi
  • Intel® VROC (SATA RAID) SATA/sSATA UEFI driver version 8.0.0.3482
    • SataDriver.efi
    • sSataDriver.efi
Intel® VROC Windows* Drivers
  • Intel® VROC Windows* Graphical User Interface (GUI) version 8.0.0.3483
  • Intel® VROC Windows* Installer Package version 8.0-1.0.10.0
    • SetupVROC.exe (multi-lingual)
  • Intel® VROC (VMD NVMe* RAID) Windows* F6 driver version 8.0.0.3483 Win10
    • \IntelVROC_f6_iaStorE_win10_64.8.0.0.3482\iaVROC
  • Intel® VROC (SATA RAID) Windows* F6 driver version 8.0.0.3483 Win10
    • \iaStorE.free.win10.64bit.8.0.0.3482\iaStorE (SATA)
    • \iaStorE.free.win10.64bit.8.0.0.3482\iaStorB (sSATA)
  • Intel® VROC Command-Line Interface (CLI) version 8.0.0.3462
UEFI Based RAID Configuration Utility1
  • Intel® VROC version 8.0.0.1396
    • RCfgVROC.efi
  • Intel® VROC SATA/sSATA version 8.0.0.1396
    • RCfgSata.efi
    • RCfgsSata.efi
UEFI Based Comply Utility1
  • Intel® VROC version 8.0.0.1396
    • RCmpVROC.efi
  • Intel® VROC SATA/sSATA version 8.0.0.1396
    • RCmpSata.efi
    • RCmpsSata.efi
UEFI Based SATA SGPIO/LED Test Utility1
  • Intel® VROC SATA/sSATA version 8.0.0.1396
    • LedToolSata.efi
    • LedToolsSata.efi
UEFI Based Intel® VROC LED Test Utility2
  • Intel® VROC version 8.0.0.1396
    • LedToolVROC.efi
UEFI Based Clear Metadata Utility
  • Intel® VROC SATA/sSATA version 8.0.0.1396
    • RClrSata.efi
    • RClrsSata.efi
UEFI Based Intel® VROC Hardware Key Checker3
  • Intel® VROC Activation Key Checker version 8.0.0.1396
    • HWKeyCheckVROC.efi

1 Secure Boot must be disabled to use this tool.
2 This tool can be used to exercise LEDs for NVMe* drives behind Intel® Volume Management Device (Intel® VMD).
3 This tool will check for the presence and type of the hardware key.

 

Related topics
Intel® Virtual RAID on CPU (Intel® VROC) Release Notes for Windows*
Release Notes for Intel® Virtual RAID on CPU (Intel® VROC)
Resources for Intel® Virtual RAID on CPU (Intel® VROC)