Support

Resolved Issues with the Intel® Virtual RAID on CPU (Intel® VROC) 9.0 Release for Windows*

Documentation

Content Type Product Information & Documentation

Article ID 000099770

Last Reviewed 11/04/2024

The following information lists the resolved issues with the Intel® VROC 9.0 release for Windows*. To learn about the latest updates of Intel® VROC for Windows*, refer to the Intel® Virtual RAID on CPU (Intel® VROC) Release Notes for Windows*.

Issue ID	Description
14023391263	NVMe* drive port information, such as the location, may be displayed incorrectly in the Intel® VROC Graphical User Interface (GUI) platform drives menu.
15014712764	A RAID 10 volume rebuild may fail while Intel® VROC was in use with an NVMe* drive with the Windows* Out-of-Band (OOB) driver.
15015886092	A CPU exception affecting an unsupported configuration cause a BIOS boot hang when SATA RAID is enabled on two Montage IOH devices.
15016194073	Consistency checks may initiate with a bad request while the NVMe* drives are in a RAID 0 configuration.
15016259559	SATA drive port information, such as the location, may be displayed incorrectly in the Intel® VROC Graphical User Interface (GUI) platform drives menu.
18036862050	A variable may be read too early in the boot process by the Intel® VROC UEFI SATA DXE drivers which may result in a Red Screen of Death (RSOD).
18037206458	A potential error may occur when changing the RAID Write Hole (RWH) policy of an encrypted RAID volume using an unencrypted drive.
18037206493	RAID volume creation using a locked drive may not have been blocked in the UEFI HII menu.
18037985742	A disk should be in normal state after a hot-plug action is committed, and the RAID volume after migration, should be in normal state. There was a possibility that instead, the disk could be marked as missing and the RAID volume could be degraded after migration.

Looking for more information about the Intel® VROC 9.0 release?

Check out the following resources: