Onboard Configuration and Service Jumpers for Intel® Server D50DNP Family

Documentation

Troubleshooting

000095096

06/14/2023

The server board includes several jumper blocks to configure, protect, or recover specific features of the server board. The following figure identifies the location of each jumper block on the server board. Pin 1 of each jumper is identified by an arrowhead (▼) silkscreened on the server board next to the pin. The following sections describe how each jumper is used.

  • BIOS Load Defaults Jumper (BIOS_DFLT – J6_PCH)
  • BIOS Password Clear Jumper (PASSWD_CLR – J2_PCH)
  • Intel® Management Engine (Intel® ME) Force Update Jumper (ME_FRC_UPDT – J3_PCH)
  • BIOS SVN Downgrade (BIOS SVN Downgrade – J14)
  • BMC SVN Downgrade (BMC SVN Downgrade – J33)

The following figure identifies the location of each jumper block on the server board.
Pin 1 of each jumper is identified by an arrowhead (▼) silkscreened on the server board next to the pin.

Jumper Block Location
Jumper block on the server board

Please read the Technical Product Specification for the Intel® Server D50DNP Family to understand the steps for each onboard configuration and service jumper.