Article ID: 000092543 Content Type: Install & Setup Last Reviewed: 07/19/2024

How Do I Connect the RGB Controller with an Intel® Arc™ A770 Graphics Limited Edition Card?

Environment

Intel Arc A770 Graphics Limited Edition Cards

BUILT IN - ARTICLE INTRO SECOND COMPONENT
Summary

Description on how connect the RGB controller with the Intel® Arc™ A770 Graphics Limited Edition Cards to your computer’s motherboard.

Description

Looking for instructions on how to Connect the RGB Controller for Intel® Arc™ A770 Graphics Limited Edition Cards to motherboard.

Resolution
NoteThe Intel® Arc™ RGB Controller will only work for controlling the LEDs on Intel® Arc™ A770 Graphics Limited Edition Cards. For any other Arc Graphics Cards with LEDs, please consult with the card manufacturer on how to control them.
  1. In the original packaging, locate and remove the USB RGB control cable from the box beneath the graphics card.

    USB RGB control cable

  2. Connect the RGB control cable to the 1x3-pin connector on the graphics card (shown below) and to the available USB 2.0 pin header on the motherboard.

    Graphics card

NoteThe location of the USB 2.0 pin header varies per motherboard. Contact your motherboard manufacturer for more information on the header location.
To remove the 3-pin RGB connector,  gently pull on the lugs on the sides of the connector with tweezers or precision pliers.