Skip To Main Content
Support Knowledge Base

How to Change Between UEFI and Legacy Boot Options on Intel® NUC Products

Content Type: Install & Setup   |   Article ID: 000092463   |   Last Reviewed: 03/29/2023

Description

Changing boot from UEFI to Legacy in NUC products

Resolution

  1. Check if the product supports legacy boot in article Intel® NUC Products Phasing Out Legacy BIOS Support.
    • If product supports legacy boot, proceed to step 2.
  2. Power on system.
  3. Press F2 when prompted to enter BIOS menu.
  4. Navigate to Boot -> Boot Order.
  5. Select the desired mode: UEFI or Legacy.
  6. Press F10 Save Changes and Exit, the system will save the changes and reboot.

Related Products

This article applies to 58 products.

Discontinued Products