Skip To Main Content
Support Knowledge Base

M50CYP Doesn’t Display the Web Page or Details Correctly When Accessing Through BMC Web Console

Content Type: Troubleshooting   |   Article ID: 000091295   |   Last Reviewed: 11/15/2024

Environment

M50CYP, BMC, EWS

Description

Certain web pages or details do not load correctly or not visible when accessing them through BMC Web console

Resolution

  1. Perform a BMC reset using the below ipmi command and run it from a remote system or jump server.
    #Ipmitool -i lanplus -U userid -P password -H ip address bmc reset cold
     
  2. Another option is to plan or schedule to perform a system reboot.
    During the POST process, press <F2> when prompted to go to BIOS Setup Utility, then navigate to change and save the required settings.

Related Products

This article applies to 3 products.