Steps to perform BIOS settings to default for Intel® Server Board S2600WF Family
How to restore BIOS settings to default using the BIOS default jumper on an Intel® Server Board S2600WF Family
Restore BIOS Default Settings can be attained by resetting the BIOS Default Jumper (J2B1), which is located on Intel® Server Board S2600WF family behind the rear USB ports and it is labeled as (J2B1). This jumper resets BIOS options, configured using the <F2> BIOS Setup Utility, back to their original default factory settings.
To use the BIOS default jumper, perform the following steps:
- Power down the server and unplug the power cord(s).
- Remove the system top cover and move the BIOS DFLT jumper from pins 1-2 (normal operation) to pins 2-3 (set BIOS defaults).
- Wait five seconds then move the jumper back to pins 1-2.
- Re-install the system top cover.
- Re-Install system power cords. (Note: The system automatically powers on after AC is applied to the system)
- During POST, press <F2> to access the BIOS setup utility to configure and save desired BIOS options.
Refer to Intel® Server Board S2600WF Product Family Technical Product Specification for more details