Skip To Main Content
Support Knowledge Base

Processor Population Rules for the Intel® Server Board S2600WF Family

Content Type: Product Information & Documentation   |   Article ID: 000088603   |   Last Reviewed: 06/09/2022

Environment

Applies for the Intel® Server Board S2600WF Family.

Description

Looking for Processor population rules of the Intel® Server Board S2600WF Family.

Resolution

Single Processor Population Rule:

When using a single processor configuration, The processor must by installed into the processor socket labeled as "CPU_1".

 

Dual Processor Population Rules:

When two processors are installed, the following population rules apply:

  • Both processors must have the same number of cores.
  • Both processors must have the same cache sizes for all levels of processor cache memory.
  • Both processors must support identical DDR4 memory frequencies.
  • Both processors must have identical extended family, extended model, processor type, family code and model number.
  • Processors with FPGA and processors with Intel® Omni-Path Fabric cannot be mixed
Note

Processors with different core frequencies can be mixed in a system, given that the prior rules are met. If this condition is detected, all processor core frequencies are set to the lowest common denominator (highestcommon speed) and an error is reported.

Additional information

Refer to the Processor Population Rules section in the Intel® Server Board S2600WF system Technical Product Specification.

Related Products

This article applies to 42 products.