How to Update Firmware BIOS on a Intel® Server Board M10JNP2SB

Unable to load EFI Bios due to error message: Update_BIOS.nsh not recognized as a command.

1. Format USB Storage drive as FAT32.
2. Extract Firmware latest version M10JNP2SBXXXX.zip to USB Storage drive.
3. Power on your system and boot to EFI SHELL.
4. Change and find the USB storage current directory (for example, fs0:\M10JNP2SBXXXX).
5. Run Update_BIOS.nsh.
6. After Flash finished, restart the Intel® Server System.
7. Check BIOS revision and ME revision to confirm the update is successful.