Summary
Steps to upgrade the fixed drive storage.
Description
Unable to find the cabling guide and instructions to install 2.5” SAS/PCIe* SSD.
Resolution
- Install the NVMe* add-in card to any PCIe* x16 slot on the server board.
- Connect the NVMe* cables to the NVMe* add-in card and the 8x2.5” SAS/PCIe* SSD (NVMe) Combo backplane. The cables are included in the accessory kit.
- Connect the I²C cable from the server board HSBP_I²C header to the backplane I²C_IN (SMBus-in) header.
Additional information
- The 5p to 3p I²C cable is required if using more than one backplane, or installing a RAID card or module.
- For information on the disk drive slot and cabling connector view, refer to the following documentation:
- Section 3. Hot-Swap Backplane Overview of the Enclosure Cabling Guide for Intel® C610 Series Chipset Based Server Systems with Hot-Swap Drive Enclosures.
- Section 2.2.1 Server Board Connector and Component Layout of the Intel® Server Board S2600CW Family Technical Product Specification.