Article ID: 000057969 Content Type: Install & Setup Last Reviewed: 05/07/2024

How to Ensure That SSDs Are Detected by the BIOS on Intel® Server Board S2600STBR

Environment

3.5 inch Hot-swap Drive Bay Kit AUP4X35S3HSDK

OS Independent family

BUILT IN - ARTICLE INTRO SECOND COMPONENT
Summary

See how the configuration guide can assist in 3.5-inch drive detection and enabling

Description

SATA drives installed in a 3.5-inch Hot-swap Drive Bay Kit AUP4X35S3HSDK are not seen by the BIOS.

Resolution

SATA drives installed in a 3.5-inch Hot-swap Drive Bay Kit AUP4X35S3HSDK must be physically connected to an Intel® Server Board S2600STBR with the following cables:

  • Mini-SAS HD cable kit AXXCBL380HDHD
  • I2C (Inter-Integrated Circuit) cables

Related articles

For more information, refer to section 3.4 4 x 3.5" Hot-Swap SAS/SATA Data Cable Guide of the Intel® Server S2600ST Product Family Configuration Guide.

Related Products

This article applies to 1 products

Intel® Server Board S2600STBR

Need more help?

Contact support

Disclaimer

1

All postings and use of the content on this site are subject to Intel.com Terms of Use.