How to Create a RAID Volume Using the Intel® Embedded Software RAID Technology 2 (Intel® ESRT2) When BIOS Is Configured in UEFI Mode on the Intel® Server Board S2600BPB

I can't determine how to create a RAID volume using the Intel® Embedded Software RAID Technology 2 (Intel® ESRT2) controller and UEFI BIOS.

The first thing is to make sure the BIOS is configured in UEFI properly; see: How to set the BIOS in UEFI/Legacy Mode.

In order to create a RAID Volume with ESRT2, proceed as follows:

1. Enter the Bios setup by pressing the F2 key, during the system boot
2. Select Advanced
3. Select PCI configuration
4. Select UEFI Option ROM Control
5. Select Intel® Embedded Software RAID Technology 2 (ESRT2)
6. Select Virtual Drive Management
7. Create Configuration
8. Select Y to save the configuration