Article ID: 000054828 Content Type: Install & Setup Last Reviewed: 02/08/2023

What’s the Cable Needed to Connect the Included Backplane with the Intel® Integrated RAID Module RMS3CC080?

Environment

Cable kit AXXCBL730HDHD2U 8x2.5 inch SAS/NVMe Hot Swap Backplane F2U8X25S3PHSIntel® Server System R2208WFTZSR

OS Independent

BUILT IN - ARTICLE INTRO SECOND COMPONENT
Summary

Cable required for hardware RAID physical installation.

Description

Unable to find all the compatible cables for the Intel® Integrated RAID Controllers nor the backplane.

Resolution

The cable that required to connect the Hot Swap Backplane F2U8X25S3PHS to the Intel® Integrated RAID Module RMS3CC080 is a Mini-SAS HD to Mini-SAS HD cable: AXXCBL730HDHD.

Note

This is also applicable when using the onboard SATA ports.

Additional information

For more information please refer to:

Configuration Guide for the Intel® Server Board S2600WF.

OCuLink and NVMe* population rules when combined with SAS/SATA drives

Related Products

This article applies to 1 products

Intel® Server System R2208WFTZSR

Need more help?

Contact support

Disclaimer

1

All postings and use of the content on this site are subject to Intel.com Terms of Use.