Skip To Main Content
Support Knowledge Base

After Windows* Update, the System goes to Shell

Content Type: Install & Setup   |   Article ID: 000036113   |   Last Reviewed: 07/26/2021
Description Resolution Additional information

Environment

Operating System

windowsserver2012r2
Intel® Server Board S2600WTT

Description

Server goes to a shell, not to Windows*, when it starts.

Resolution

The Change Boot Order screen allows you to configure the desired order of legacy or UEFI boot devices in which the boot device is to be tried sequentially. Refer to the Change Boot Order Screen section in the Intel® Server System BIOS Setup Utility Guide page:

  1. Press <F2> to enter system BIOS setup.
  2. From the Main screen, select Boot Maintenance Manager.
  3. Choose the Change Boot Order option.
  4. Press F10 to save changes and reboot.

 

Additional information

After Windows* update, the system goes to the shell.

Need more help?

Contact support
Contact support