"Voltage PFault Fail Safe" error

Node fails to power on.

The System Event Log (SEL) reports the following:

2 | 03/07/2018 | 11:14:53 | Voltage 3.3V PG | State Asserted | Asserted

3 | 03/07/2018 | 11:15:01 | Entity Presence TPM Pres | Absent | Asserted

4 | 03/07/2018 | 11:15:02 | Voltage 3.3V PG | State Asserted | Asserted

5 | 03/07/2018 | 11:15:02 | Entity Presence TPM Pres | Absent | Asserted

6 | 03/07/2018 | 11:15:09 | Voltage PFault Fail Safe | State Asserted | Asserted

Another example is:

1 | 06/05/2019 | 16:09:56 | Event Logging Disabled SEL | Log area reset/cleared | Asserted

2 | 06/07/2019 | 19:45:07 | Voltage 1.5V PG | State Asserted | Asserted

3 | 06/07/2019 | 19:45:16 | Entity Presence TPM Pres | Absent | Asserted

4 | 06/07/2019 | 19:45:23 | Voltage PFault Fail Safe | State Asserted | Asserted

5 | 06/07/2019 | 19:45:27 | Entity Presence TPM Pres | Absent | Asserted



Ensure all cables are connected correctly.

Contact Support with the system event logs* for diagnosis should that be needed.