Configuring Jumbo Frames on Intel® Modular Server

Jumbo frame configuration on the Intel® Modular Server may not save correctly in all cases.

To configure jumbo frames on the Intel Modular Server, customers are advised to use the following process:

1. Go to the Advanced Configuration GUI for the Ethernet Switch.
2. On the first screen:
   • Select Enable in the “Jumbo Frame After Reset”
   • Select Apply
   • Select Save changes
3. Go to the reset screen in the advanced configuration menu:
   • Select Save changes
   • Wait for 15 seconds
   • Select Reset

Upon reboot, Jumbo frames should show as enabled.