SAS Address NOT Programmed - Error Message for Boards and Kits
On boot, you may see an error message:
LSI Logic Corp. MPT SAS BIOS
MPTBIOS-6.16.00.00 (2007.05.07)
Copyright 2000-2007 LSI Logic Corp.
SAS Address NOT programmed on controller in slot (10)
Initializing...
ERROR! Adapter Malfunctioning!
MPT BIOS Fault 13h encountered on adapter PCI (06h,00h,00h)
Press any key to continue ...
To resolve this issue, find the SAS address from the sticker on the module, and use the following command as per the README file:
mptutil -o -t <sas id>
This will correctly program the SAS address.