Blink Example for the Intel® Galileo Board

This example makes an LED blink every second. We use the code provided under the examples for Arduino* IDE 1.5.3.

Hardware

• Intel® Galileo Board
• Breadboard
• One LED
• Wires

Instructions

1. Using two wires, make the following breadboard-to-Intel Galileo Board connections:
    

   Breadboard	Intel® Galileo Board
   Positive strip	5 V
   Negative strip	GND



2. Place LED on the breadboard. Notice that the longer leg on the LED is positive, and the shorter leg is negative.
    

   Intel Galileo Board	LED	Breadboard
   	Negative	Negative strip
   Pin 13	Positive



3. Connect the power supply. The connect the USB to the USB Client Port on the Intel Galileo Board.
4. Open Arduino IDE.
5. Click Tools > Board and select Intel Galileo.
6. Click Tools > Serial Port and select the Com # that the Intel Galileo Board is connected to.
7. Click File > Examples > 01.Basics and select Blink.
8. Click the upload icon.

Circuit