This content is for Intel® PROSet for wired Intel® Ethernet Adapters and network connections. For wireless connection software, see Learn about Intel® PROSet/Wireless Software.
Note | Intel® PROSet for Windows* Device Manager is available on Windows® 10 up to version 1803 and Windows Server 2016. For Windows 10 v.1809 and above, as well as Windows Server 2019, the same functionality has been moved to the Intel® PROSet Adapter Configuration Utility (ACU). |
The Intel® PROSet for Windows* Device Manager is an extension for Windows Device Manager. When you install the Intel PROSet software, tabs are automatically added to the supported Intel® Adapters in Windows Device Manager. These features allow you to test and configure wired Intel® Ethernet Adapters.
Click on the topics to expand the content:
To access Windows Device Manager in Windows 7* or Windows Server 2008 R2:
To access Windows Device Manager in Windows* 8.1, Windows® 10, Windows Server 2012 R2, and Windows Server 2016:
Click any setting to display the associated help information.
Note | Help is displayed only if Intel® PROSet for Windows Device Manager is installed. |
Installation of Intel® PROSet for Windows Device Manager is optional. Intel® PROSet Software must be installed if you want to use Intel® Advanced Networking Services.
The Intel® PROSet Software version is visible in Windows Device Manager. Go to network adapter properties and click the Link Speed tab as shown in the figure here.