initialize_connections (::quartus::external_memif_toolkit)
The following table displays information for the initialize_connections Tcl command:
Tcl Package and Version |
Belongs to ::quartus::external_memif_toolkit 1.0 |
||
Syntax | initialize_connections [-h | -help] [-long_help] | ||
Arguments | -h | -help | Short help | |
-long_help | Long help with examples and possible return values | ||
Description |
Initializes the internal data structures of the toolkit. This command must be run before any other toolkit commands are executed. |
||
Example Usage |
project_open dut initialize_connections terminate_connections project_close |
||
Return Value | Code Name | Code | String Return |
TCL_OK | 0 | INFO: Operation successful | |
TCL_ERROR | 1 | ERROR: Unable to find active revision. Specify an active revision name using set_current_revision <revision name>. | |
TCL_ERROR | 1 | ERROR: The current project specifies a part that cannot be loaded. Verify the device family is correctly installed. | |
TCL_ERROR | 1 | ERROR: The connection to the hardware drivers could not be established. | |
TCL_ERROR | 1 | ERROR: Illegal connections detected | |
TCL_ERROR | 1 | ERROR: The current project settings are invalid. Verify that all project settings are valid. | |
TCL_ERROR | 1 | ERROR: The JTAG Debug Information (.jdi) file called <string> could not be found. Ensure this file exists or run quartus_asm to create it. | |
TCL_ERROR | 1 | ERROR: You must open a project before you can use this command. | |
TCL_ERROR | 1 | ERROR: Could not initialize System Console. <string> | |
TCL_ERROR | 1 | ERROR: Toolkit has already been initialized. Use terminate_connections to de-initialize the toolkit. |