TMC-20204: Endpoints of Paths Failing Setup Analysis with Retiming Restrictions
Description
Violations of this rule identify endpoints of paths that fail setup analysis with retiming restrictions. A path that fails setup analysis might not be fully optimized by the retimer if either of the endpoints have a retiming restriction.
Parameters
| Name | Description | Type | Default Value | Min Value | Max Value |
|---|---|---|---|---|---|
| maximum_setup_slack | Reports a violation for timing paths that have a setup slack below the value of this parameter. | double | 0.0 | ||
| to_clock_filter | Reports a violation for timing paths that end at a register in a clock domain that matches the value of this parameter. | string | * | ||
| minimum_number_of_adders | Reports a violation for timing endpoints that are preceded by a number of independent adder chains greater than or equal to this value. | integer | 3 | ||
| minimum_number_of_soft_mult_chains | Reports a violation for timing endpoints that are preceded by a number of independent adder chains that are implementing multiplier logic greater than or equal to this value. | integer | 2 |
Recommendation
Consider removing these retiming restrictions to allow retiming optimizations to improve performance. Refer to Retiming Restrictions and Workarounds in the Intel Hyperflex Architecture High-Performance Design Handbook for more information. Also refer to the Fast Forward Timing Closure Recommendations report for step-by-step suggestions for RTL changes and estimated performance improvement.
Severity
Medium
Tags
| Tag | Description |
|---|---|
| retime |
Device Family
- Intel® Stratix® 10
- Intel® Agilex™
- Intel® Arria® 10
- Intel® Cyclone® 10 GX