Add Hardware Dialog Box
Allows you to add new programming hardware to the list that the Intel® Quartus® Prime software recognizes.
USB devices do not appear in the Add Hardware dialog box, because the Intel® Quartus® Prime software automatically detects and adds USB devices to the Hardware list in the Hardware Setup dialog box when you plug them into a USB port on your computer.
You can also specify the hardware type and its port and baud rate settings, or server name and server password settings, if applicable.
Hardware type:
- Intel® FPGA Ethernet Cable
- ByteBlasterMV,
- Intel® FPGA Parallel Port Cable
Port:
Specifies the port to which the programming hardware selected in the Hardware Type list is attached.
Server Name:
Specifies the name of the server you want to use to transfer programming data to a device via the Intel® FPGA Ethernet Cable.
Server Port:
Displays the TCP port used when connecting to the server you want to use to transfer programming data to a device via the Intel® FPGA Ethernet Cable.
Server Password:
Specifies the password for the server you want to use to transfer programming data to a device via the Intel® FPGA Ethernet Cable.