Report Custom CDC Viewer Command
The Timing Analyzer's command allows you to configure and display a custom clock domain
crossing report. This report displays the results of setup, hold, recovery, and removal
checks on clock domain crossing transfers. The equivalent scripting command is report_cdc_viewer.
The following options are available for this report:
| Option | Description |
|---|---|
| Clocks | From Clock and To Clock filter paths in the report to show only the launching or latching clocks you specify. |
| Analysis type | Options are Setup, Hold, Recovery, or Removal. The Timing Analyzer reports the results for the type of analysis you select. |
| Transfers | Specifies the type of clock transfers to include or exclude from the report, including Timed transfers, Fully cut transfers, Clock groups, Inactive clocks, and Non-crossing transfers. You can specify the Maximum slack limit and Grid options for the report. |
| Detail level | Full shows all details of the report and Summary filters the details and shows summary data. |
| Report panel name | Specifies the name of the report panel. You can
optionally enable File name
to write the information to a file. If you append .htm or .html as a suffix, the Timing Analyzer produces the
report as HTML. If you enable File
name, you can Overwrite or Append the file with latest data, and specify
Grid or List format. Note: In grid
format reports, clocks with non-crossing transfers always appear
if they have transfers between other clocks.
|
| Tcl command | Displays the Tcl syntax that corresponds with the GUI options you select. You can copy the command from the Console into a Tcl file. |