Diagnostic Report Clocks Command You generate this report by double-clicking Report Clocks in the Tasks pane in the Timing Analyzer. Report Clock Transfers Command You generate this report by clicking Reports > Diagnostic > Report Clock Transfersin the Timing Analyzer. Report CDC Viewer Command The Clock Domain Crossing (CDC) Viewer graphically displays the setup, hold, recovery, or removal analysis of all clock transfers in your design. Report Unconstrained Paths Command You generate this report by double-clicking Report Unconstrained Paths in the Tasks pane in the Timing Analyzer. Report SDC Command You generate this report by double-clicking Report SDC in the Tasks pane in the Timing Analyzer. Report Ignored Constraints Command You generate this report by double-clicking Report Ignored Constraints in the Tasks pane in the Timing Analyzer. Check Timing Command You generate this report by clicking Check Timing in the Tasks pane in the Timing Analyzer. Report Partitions Command You generate these reports by clicking Report Partitions in the Tasks pane in the Timing Analyzer.