Add Partition Dialog Box (Programming File Generator)
To open in the Programming File Generator,
click the Configuration Device tab, select a
device from the list, and click Add
Partition.
Allows you to specify the attributes of a new partition. The following settings are available:
Setting | Description |
---|---|
Name | Name that you give to the partition. |
Input file | Input file to program into the flash partition. |
Page |
Configuration devices can store multiple configuration bitstreams in flash memory, called pages. CFI configuration devices can store up to eight configuration bitstreams. Intel® Hyperflex™ devices can store up to four configuration bitstreams, including the factory image. In Intel® Hyperflex™ devices, with the remote system update feature enabled, Page represents the parity. |
Address Mode | The options are:
|
Start address | Specifies the start address of the partition. Only enabled when Address Mode is Block or Start. |
End address | Specifies the end address of the partition. Only enabled when Address Mode is Block. |