Setting Up the Tau Working Environment
To use the Intel® Quartus® Prime software with the Mentor Graphics® Tau software, you must install the Intel® Quartus® Prime software and establish an environment that facilitates processing designs. The Intel® Quartus® Prime/Mentor Graphics® Tau interface is installed automatically when you install the Intel® Quartus® Prime software.
Note: The Intel® Quartus® Prime Software Release Notes are available on the Altera website and provide up-to-date information on which versions of Mentor Graphics® software applications the current version
of the Intel® Quartus® Prime software supports. The Intel® Quartus® Prime readme.txt file provides information on installation and operating requirements. You should read the Release Notes and
readme.txt before installing the Intel® Quartus® Prime software. After installation, you can open the Release Notes and readme.txt file from the Intel® Quartus® Prime
Help menu.
To set up your working environment for the Intel® Quartus® Prime/Tau software interface, add the following environment variables to your .cshrc file:
setenv QUADHOME <Tau system directory>/<Tau software version number> setenv LM_LICENSE_FILE<Tau license file path>:$LM_LICENSE_FILE set path=($TAUHOME/bin $path)
Note: The information presented here assumes that you are using the C shell and that your Intel® Quartus® Prime system directory is /usr/quartus on a Linux workstation. If not, you
must use the appropriate syntax and procedures to set environment variables for your shell.
To source your .cshrc file, at the command prompt on a Linux workstation, type:source .cshrc.