ID:13030 Reduced the following open-drain buffers that are fed by GND
CAUSE: The design contains one or more open-drain buffers that are fed by the constant GND. Essentially, the output pins that these open-drain buffers drive will always have the value GND. As a result, the Quartus Prime software replaced the fanout from the open-drain buffers to the output pins with the constant GND. For example, this situation occurs in the following Verilog design:
module test (output out); wire gnd; assign gnd = 1'b0; OPNDRN my_opndrn (.in(gnd), .out(out)); endmoduleSee the sub-messages below to view a list of the removed open-drain buffers.
ACTION: Either remove the specified open-drain buffer from the design or drive it from a non-constant driver.