Input Ports
Port Name |
Required |
Description |
Comments |
---|---|---|---|
addr[] |
Yes |
Address bus. |
Input port [WIDTH_ADDRESS-1..0] wide. The add port is used with the parallel interface protocol only. |
di[] |
Yes |
Data bus input. |
Input port [WIDTH_DATA-1..0] wide. The data port is used with the parallel interface protocol only. |
nerase |
No |
Erase input port. |
The nerase port is used with the parallel interface protocol only. When the ACCESS_MODE parameter is set to READ_ONLY, the nerase port cannot be used. |
nread |
Yes |
Read input port. |
The nread port is used with the parallel interface protocol only. |
nwrite |
No |
Write input port. |
The nwrite port is used with the parallel interface protocol only. |
oscena |
No |
Signal that enables the internal oscillator. |
De-assert the oscena port to disable the oscillator (osc) port when not using the parallel interface protocol. |