Simulation
The Simulation section lists user options for simulation. You can see and change these options in the quartus2.ini file with two Tcl commands, set_user_option and get_user_option under the project package.
The following table shows the Simulation section variable names and values:
Variable Name |
Values |
---|---|
1 | 0 (On | Off) |
|
SIMULATION_OUTPUTS_FORMAT |
1 | 0 (On | Off) |
MAXIMUM_VECTOR_COMPARISON_MISMATCHES |
<number> |
OVERWRITE_WAVEFORM_INPUTS_WITH_SIMULATION_OUTPUTS |
1 | 0 (On | Off) |
SIMULATION_OUTPUTS_FORMAT |
vwf | cvwf | vcd | 0 | 1 | 2 |