JTAG Chain Configuration

Displays controls for the JTAG Chain Configuration as follows:

  • JTAG Chain Configuration— Displays status messages for the Logic Analyzer Interface JTAG Chain Configuration (such as JTAG ready).
  • Hardware— Allows you to select the communications cable, such as the ByteBlasterMV, ByteBlaster II, or USB-Blaster, and displays the name of the currently selected communications cable and the port to which it is connected.
  • Device— Displays which device you are using.
  • The name of the device is in the following format: <number on circuit board>: <device name> <JTAG ID code>. For example, in the device name @1: 0x082000DD: EP20K200C, @1 indicates that it is the first device on the circuit board, EP20K200C is the device name, and 0x082000DD is the JTAG ID code for the device.
  • File— Allows you to specify the SRAM Object File (.sof) you want to use to program the device that you selected in the Device list.
  • Setup— Opens the Hardware Setup dialog box, which allows you to add and remove hardware items from the Hardware list, add and remove JTAG servers from the JTAG Servers list, configure your local JTAG server, and specify a hardware setup for device programming and/or configuration.
  • Scan— Scans for device(s) on the circuit board that are connected to your system. The detected device(s) are displayed in the Device list.
  • Program icon— Clicking the button with the Program icon starts programming the device.