To compile libraries and design files with command-line commands

  1. If you have not already done so,set up a QuestaSim project with command lines.
    Important: If your design contains the alt2gxb megafunction, refer to the appropriate megafunction topic for required settings.
  2. Enter the following commands to direct the QuestaSim software to compile the appropriate libraries and design files for VHDL designs.

    If your design contains the alt2gxb megafunction, type the following commands at the QuestaSim prompt: 

    vlib lpm    
vlib altera    
vlib sgate    
vmap lpm work    
vmap altera work    
vmap sgate work    
vcom -worklpm<path_to_library>/220pack.vhd  
vcom-work lpm <path_to_library>/220model.vhd    
vcom -work sgate  <path_to_library>/sgate_pack.vhd  
vcom -work sgate<path_to_library>/sgate.vhd  
vcom -work stratixiigx_gxb<path_to_library>/stratixiigx_hssi_atoms.vhd.vhd  
vcom -work stratixiigx_gxb<path_to_library>/stratixiigx_hssi_components.vhd

    or, for a design targeting a Stratix® IV GX device: 

    vcom -work stratixivgx_gxb <path_to_library>/stratixivgx_hssi_atoms.vhd.vhd    
vcom -work stratixivgx_gxb <path_to_library>/stratixivgx_hssi_components.vhd

    To compile the device-specific simulation models, VHDL Output File, and test bench file (if you are using one), type the following commands at the QuestaSim prompt: 

    vcom -work work <path_to_library>/<device family>_components.vhd  
vcom -work work <path_to_library>/<device family>_atoms.vhd  
vcom -work work <design name>.vho  
vcom -work work <test bench>.vhd
  3. Enter the following commands to direct the QuestaSim software to compile the appropriate libraries and design files for Verilog HDL designs.

    To compile the device-specific simulation models, Verilog Output File, and test bench file (if you use one), type the following commands at the QuestaSim prompt: 

    vlog -work work   <path_to_library>/<device family>_atoms.v  
vlog -work work <design name>.vo  
vlog -work work <test bench>.v