Parameters
ERASE_METHOD = "MEM_ADD"
parameter cannot be used with the
WRITE_MODE = "PAGE"
parameter.
Parameter |
Type |
Required |
Comments |
---|---|---|---|
|
String |
Yes |
Specifies the access mode. Values are
|
|
String |
No |
Specifies the erase method. Values are
|
|
Integer |
No |
Specifies the erase time for the user flash
memory. This parameter is used for simulation purposes only and
allows you to shorten the user flash memory simulation time. Values
can range from |
|
String |
Yes |
4-bit address that specifies the 4 MSBs of the device address. |
|
String |
No |
Name of the Memory Initialization File (.mif) Definition or Hexadecimal (Intel-Format) File (.hex) Definition containing RAM initialization data
( |
|
String |
No |
If the |
|
String |
No |
If the |
|
String |
No |
Specifies whether the write-protect port
protects only the upper half of the UFM block or the entire UFM
block from writes/erases. Values are |
|
String |
Yes |
Specifies the memory size. Values are
|
|
Integer |
No |
Specifies the oscillator frequency for the
user flash memory. This parameter is used for simulation purposes
only and allows you to shorten the user flash memory simulation
time. Values are |
|
Integer |
No |
Specifies page write size value. Values are
|
|
Integer |
No |
Specifies the program time for the user flash
memory. This parameter is used for simulation purposes only and
allows you to shorten the user flash memory simulation time. Values
can range from |
|
String |
No |
Specifies the write mode. Values are
|