INCLOCK_PERIOD
|
Integer
|
No
|
Specifies the period of the
inclock port in picoseconds (ps) time unit Definition This parameter is not
required if a Clock
Settingstiming assignment is
specified for the inclock port. This port is required
for simulation with other EDA simulators.
|
INCLOCK_SETTINGS
|
String
|
No
|
Specifies the Clock Settings assignment
to be used with the inclock port. If the
INCLOCK_SETTINGS parameter is specified, the
INCLOCK_PERIOD parameter is not required and is
ignored. If omitted, the default is "UNUSED".
|
VALID_LOCK_CYCLES
|
Integer
|
No
|
This parameter is available only for
obsoleted device families.
|
INVALID_LOCK_CYCLES
|
Integer
|
No
|
This parameter is available only for obsoleted
device families.
|
VALID_LOCK_MULTIPLIER
|
Integer
|
No
|
This parameter is available only for obsoleted
device families.
|
INVALID_LOCK_MULTIPLIER
|
Integer
|
No
|
This parameter is available only for obsoleted
device families.
|
OPERATION_MODE
|
String
|
No
|
This parameter is available only for obsoleted
device families.
|
CLOCK0_BOOST
|
Integer
|
No
|
Specifies the integer multiplication factor,
which must be greater than 0 , for the
clock0 port with respect to the input clock frequency.
This parameter can be specified only if the clock0
port is used; however, it is not required if a Clock
Settings assignment is specified for the clock0
port. If omitted, the default is 1 .
|
CLOCK0_DIVIDE
|
Integer
|
No
|
Specifies the integer division factor, which
must be greater than 0 , for the clock0
port with respect to the input clock frequency. This parameter can
be specified only if the clock0 port is used; however,
it is not required if a Clock Settings assignment is
specified for the clock0 port. If omitted, the default
is 1 .
|
CLOCK0_SETTINGS
|
String
|
No
|
Specifies the Clock Settings assignment
to be used with the clock0 port. If this parameter is
specified, the CLOCK0_BOOST ,
CLOCK0_DIVIDE , and OUTCLOCK_PHASE_SHIFT
parameters are not required and are ignored. If more than one of
the CLOCK <value>_SETTINGS
parameters are specified, they must have the same phase shift. If
omitted, the default is "UNUSED" .
|
CLOCK1_BOOST
|
Integer
|
No
|
Specifies the integer multiplication factor,
which must be greater than 0 , for the
clock1 port with respect to the input clock frequency.
This parameter can be specified only if the clock1
port is used; however, it is not required if a Clock
Settings assignment is specified for the clock1
port. If omitted, the default is 1 .
|
CLOCK1_DIVIDE
|
Integer
|
No
|
Specifies the integer division factor, which
must be greater than 0 , for the clock1
port with respect to the input clock frequency. The parameter can
be specified only if the clock1 port is used; however,
it is not required if a Clock Settings assignment is
specified for the clock1 port. If omitted, the default
is 1 .
|
CLOCK1_SETTINGS
|
String
|
No
|
Specifies the Clock Settings assignment
to be used with the clock1 port. If this parameter is
specified, the CLOCK1_BOOST ,
CLOCK1_DIVIDE , and OUTCLOCK_PHASE_SHIFT
parameters are not required and are ignored. If more than one of
the CLOCK <value>_SETTINGS
parameters are specified, they both must have the same phase shift.
If omitted, the default is "UNUSED" .
|
OUTCLOCK_PHASE_SHIFT
|
Integer
|
No
|
This parameter is available only for obsoleted
device families.
|