addr[]
|
Yes
|
Address bus.
|
Input port [WIDTH_ADDRESS-1..0]
wide. The add port is used with the parallel interface
protocol only.
|
di[]
|
Yes
|
Data bus input.
|
Input port [WIDTH_DATA-1..0]
wide. The data port is used with the parallel
interface protocol only.
|
nerase
|
No
|
Erase input port.
|
The nerase port is used with the
parallel interface protocol only. When the ACCESS_MODE
parameter is set to READ_ONLY , the nerase
port cannot be used.
|
nread
|
Yes
|
Read input port.
|
The nread port is used with the
parallel interface protocol only.
|
nwrite
|
No
|
Write input port.
|
The nwrite port is used with the
parallel interface protocol only.
|
oscena
|
No
|
Signal that enables the internal
oscillator.
|
De-assert the oscena port to
disable the oscillator (osc ) port when not using the
parallel interface protocol.
|