Hexadecimal (Intel-Format) File (.hex) Definition

An ASCII text file (with the extension .hex). You can use a Hexadecimal (Intel-Format) File (.hex) in the Quartus^® Prime Standard Edition software to store the initial memory values for a memory block, such as CAM, RAM, or ROM, that is implemented in an Altera device, or to build software project executables.

You can use .hex files as input files in the Quartus^® Prime Standard Edition software in the following ways:

The Memory Editor can create a .hex file for memory initialization in the Compiler and Simulator. You can also use a Memory Initialization File (.mif) to provide memory initialization data.
The In-System Memory Content Editor can use and create a .hex file to import and export data.

The format of each line in a .hexfile is as follows:`:AABBBBCCDD"¦DDEE`
Code	Definition
`AA`	the number of bytes in the data field (`DD"¦DD`)
`BBBB`	starting address
`CC`	type (00 = data, 01 = end of file, 02 = address offset)
`DD..DD`	data field
`EE`	checksum value
Important: Due to the complexity of the Hexadecimal (Intel-Format) File type, Altera recommends that you use the Quartus^® Prime Standard Edition Memory Editor to create .hex files.

You can store configuration data for one or more Altera devices in an output file called a Hexadecimal (Intel-Format) Output File (.hexout). The .hexout file format is an ASCII text file with the extension .hexout to avoid overwriting initial memory content files that have the extension .hex.

The data width of a .hex file is always a multiple of 8 bits. When you initialize a memory block that is not the same width as the .hex file, the Quartus^® Prime Standard Edition software wraps or pads the file as described in the table below:

File data width greater than memory width	File data width smaller than memory width
Memory size is a multiple of 8: When the .hex file data width is a multiple of the memory width, the Quartus^® Prime Standard Edition software wraps the data to subsequent addresses. When the .hex file data width is not a multiple of the memory width, the Quartus^® Prime Standard Edition software pads the data to a multiple of the memory width just greater than the .hex file data width. For example, with a memory width of 24 (Address: 040000002A124FFF72) and a .hex file data width of 32 (Address: 00000001FF), the Quartus^® Prime Standard Edition software pads the 32 bit .hex file data width to 48 bits (the multiple of 24 just greater than 32), and then wraps the 48 bits around the 24 bit memory width, resulting in: Address: 00002A Address: 124FFF Memory size is not a multiple of 8: The Quartus^® Prime Standard Edition software wraps the data to the memory width equal to the multiple of 8 and just greater than the actual memory width, and then truncates the memory block to the actual size of the memory width, which is not a multiple of 8.	RAM / ROM— The Quartus^® Prime Standard Edition software pads the memory block with zeroes next to the MSB (most significant bit). MAX II User Flash Memory (UFM)— The Quartus^® Prime Standard Edition software pads the memory block with ones next to the LSB (least significant bit).

File data width greater than memory width

File data width smaller than memory width

Memory size is a multiple of 8:

When the .hex file data width is a multiple of the memory width, the Quartus^® Prime Standard Edition software wraps the data to subsequent addresses.
When the .hex file data width is not a multiple of the memory width, the Quartus^® Prime Standard Edition software pads the data to a multiple of the memory width just greater than the .hex file data width. For example, with a memory width of 24 (Address: 040000002A124FFF72) and a .hex file data width of 32 (Address: 00000001FF), the Quartus^® Prime Standard Edition software pads the 32 bit .hex file data width to 48 bits (the multiple of 24 just greater than 32), and then wraps the 48 bits around the 24 bit memory width, resulting in: Address: 00002A Address: 124FFF

Memory size is not a multiple of 8:

The Quartus^® Prime Standard Edition software wraps the data to the memory width equal to the multiple of 8 and just greater than the actual memory width, and then truncates the memory block to the actual size of the memory width, which is not a multiple of 8.

RAM / ROM— The Quartus^® Prime Standard Edition software pads the memory block with zeroes next to the MSB (most significant bit).
MAX II User Flash Memory (UFM)— The Quartus^® Prime Standard Edition software pads the memory block with ones next to the LSB (least significant bit).

If the size of the .hex file does not match the size of the memory you are initializing, the Quartus^® Prime Standard Edition software performs as described in the table below:

File data depth greater than memory depth	File data depth smaller than memory depth
Ignores extra data.	RAM / ROM— The Quartus^® Prime Standard Edition software initializes the addresses with no data to zero. MAX II User Flash Memory (UFM)— The Quartus^® Prime Standard Edition software initializes the addresses with no data to the hexadecimal value of <`F...F`>.

File data depth greater than memory depth

File data depth smaller than memory depth

Ignores extra data.

RAM / ROM— The Quartus^® Prime Standard Edition software initializes the addresses with no data to zero.

MAX II User Flash Memory (UFM)— The Quartus^® Prime Standard Edition software initializes the addresses with no data to the hexadecimal value of <F...F>.

Note: File data depth refers to the number of addresses that you are initializing. The Quartus II software fills addresses that you are not initializing with zeros or <F...F>, depending on whether the file data depth is UFM or not.

Note:

In the Quartus^® Prime Standard Edition software, you have the option of reading or writing .hex files in the byte addressable (Intel hexadecimal format) mode, or the word-addressable mode. You can choose between the two modes by changing the Read or write Hexadecimal Files (.hex) using byte addressing (Intel format) option in the Quartus^® Prime Standard Edition software. Setting this option in the Memory Editor page in the Options dialog box. Turning on this option for the current project overrides the global setting.

The Quartus^® Prime Standard Edition software always reads word addressable .hex files in the word addressable mode even if the Read or write Hexadecimal Files (.hex) using byte addressing (Intel format) option is turned on.