You open this dialog box by clicking
Select Flash Device in the
Programmer.
Allows you to add flash devices to the Programmer.
-
Device
family—Displays flash device families
available for configuration, programming, or bypassing in a JTAG
chain. The Device name list
displays the available devices from the selected device family.
Turning on the check box next to a device family name turns on the
check boxes of all the available devices in that family. When you
turn on the check box next to a device, you indicate that you want
to add that device to the Device list of the programming list in the
Programmer.
-
Device name—Displays
available devices for the device family selected in the
Device family list.