Displays controls for the JTAG Chain Configuration as
follows:
- JTAG Chain
Configuration— Displays status messages
for the Logic Analyzer Interface JTAG Chain Configuration (such as
JTAG ready).
- Hardware— Allows you
to select the communications cable, such as the ByteBlasterMV,
ByteBlaster II, or USB-Blaster, and displays the name of the
currently selected communications cable and the port to which it is
connected.
- Device— Displays
which device you are using.
- The name of the device is in the following format: <number on circuit board>: <device name>
<JTAG ID code>. For example, in the device name @1: 0x082000DD: EP20K200C, @1 indicates that it is the first device on the circuit board,
EP20K200C is the device name, and 0x082000DD is the JTAG ID code for the device.
- File—
Allows you to specify the SRAM Object File (.sof) you want to use to program the
device that you selected in the Device list.
- Setup— Opens the
Hardware Setup dialog box,
which allows you to add and remove hardware items from the Hardware
list, add and remove JTAG servers from the JTAG Servers list,
configure your local JTAG server, and specify a hardware setup for
device programming and/or configuration.
- Scan—
Scans for device(s) on the circuit board that are connected to your
system. The detected device(s) are displayed in the Device list.
- Program
icon— Clicking the button with the
Program icon starts programming the device.