Allows you to specify properties for the conduit.
General tab- Conduit
name— Displays and allows you to edit the
name of the conduit. The conduit name is
an alias that acts as a reference to the signals in the collection.
The conduit alias is enclosed in double angle brackets to
differentiate it from a bus or node name, for example,
"<<control>>".
- Hide name in block design
file— Hides any appearances of the
conduit name in the Block Design
File.
Signals tab- Signal— Allows you
to type a signal name or a comma-delimited list of signal names to
add to the conduit, or displays the
signal selected in the Connections list.
- Connections— Displays all the signals and their connectors
from the selected conduit in the Block Design File. You can edit the signals and
their connections.
- To edit a cell in the Connections table, you can
double-click either a signal or a connection name in a cell, and select a name
in the list.
- To delete a signal and its connections from the table, you can select the
signal and click Delete. However, you cannot delete
rows, shown with I/O pin icons in the Connections table,
that represent connections to pin signals.
- To add a signal, you can type the signal name in the
Signal box, and click Add. You
can also add a signal by double-clicking the
<<new>> cell and selecting a name in the
list.
- Font tab
- Format tab