Use netlist

Specifies the netlist to include in a node name search. The following options are available:

• Pre-synthesis— Specifies that only node names contained in the pre-synthesis netlist are found. The pre-synthesis netlist is created after design elaboration, but before any synthesis optimizations done by physical synthesis.
• Show only SignalTapII Names— Specifies that only internal device nodes that can be analyzed by the SignalTapII Logic Analyzer are found.
• Post-synthesis— Specifies that only node names contained in the post-synthesis netlist are found.
• Post-fitting— Specifies that only node names contained in the post-fitting netlist are found. The post-fitting netlist is created after physical synthesis optimizations and fitting.
• Show only SignalTap II and SignalProbe Names— Specifies that only nodes that can be analyzed by the SignalTapII Logic Analyzer or have been designated as a SignalProbe source are found.