Specifies the current Altera-provided or user-defined filter.
The Quartus® Prime Standard Edition software includes the following non-editable,
default filters. You can use these filters to perform a node name
search, or you can create a new filter using any of the
Altera-provided filters settings as the initial settings.
- Pins: input—
Finds all input pin
names in your design file(s).
- Pins:
output— Finds all output pin names in your
design file(s).
- Pins:
bidirectional— Finds all bidirectional pin
names in your design file(s).
- Pins: all—
Finds all pin names in your design file(s).
- Pins:
virtual— Finds all virtual pin names.
- Registers:
pre-synthesis— Finds all user-entered
register names contained in the design after design elaboration,
but before physical synthesis does any synthesis optimizations.
- Registers:
post-fitting— Finds all user-entered
register names in your design file(s) that survived physical
synthesis and fitting.
- Design Entry (all
names)— Finds all user-entered names in your
design file(s).
- Post-Compilation— Finds
all user-entered and compiler-generated names that do not have
location assignments and survived fitting.
- SignalTapII:
pre-synthesis— Finds all internal device
nodes in the pre-synthesis netlist that can be analyzed by the
SignalTapII Logic Analyzer.
- SignalTapII:
post-fitting— Finds all internal device
nodes in the post-fitting netlist that can be analyzed by the
SignalTapII Logic Analyzer.
- SignalProbe— Finds all
SignalProbe device nodes in the post-fitting netlist.